45
Settings and Adjustments
Selects whether to mix or not mix interactive
audio and secondary audio (commentary)
when playing a BD that contains such audio.
b
PCM 96kHz and PCM 192 kHz audio signals are
output as PCM 48kH z audio signals when “BD
Audio Setting” is set to “Mix.”
Lowers the audio output level to prevent
sound distortion.
b
“Audio ATT” does not affect the output from the
HDMI OUT jack and the DIGITAL OUT
(OPTICAL/COAXIAL) jack.
Selects the audio signals output when playing
Dolby Digital discs.
This setting affects the output from the
DIGITAL OUT (COAXIAL/OPTICAL)
jack.
Selects the audio signals output when playing
DTS discs. This setting affects the output
from the DIGITAL OUT (COAXIAL/
OPTICAL) jack.
Selects the maximum sampling frequency for
the PCM signals output from the DIGITAL
OUT (OPTICAL/COAXIAL) jack.
b
• If you select “96kHz/24bit” when an AV
amplifier (receiver) that does not support 96 kHz
is connected, no sound or a loud sound may
result.
• “48kHz/96kHz PCM” is not effective when
“Audio Output Priority” is set to “HDMI” or
“Stereo Analog.”
BD Audio Setting
Mix Outputs the audio obtained
by mixing the interactive
audio and secondary audio
to the primary audio.
Direct Outputs the primary audio
only.
Audio ATT
On Enables Audio Attenuation.
Off Disables Audio Attenuation.
Dolby Digital
Downmix
PCM
Converts to output Linear
PCM signals. Select this
when connecting an audio
device without a built-in
Dolby Digital decoder.
Dolby Digital Select this when connecting
an audio device with a built-
in Dolby Digital decoder.
DTS
Downmix
PCM
Converts to output Linear
PCM signals. Select this
when connecting to an audio
device without a built-in
DTS decoder.
DTS Select this when connecting
to an audio device with a
built-in DTS decoder.
48kHz/96kHz PCM
48kHz/16bit Outputs audio signals of
96kHz sampling as 48 kHz/
16bit.
96kHz/24bit Outputs audio signals of
96kHz sampling as 96 kHz/
24bit. However, the signals
will be output as 48 kHz/
16bit if the source is copy-
protected.
,continued