Front panel
A[/1 (on/standby) (page 30)

Turns on the player, or sets to standby mode.

B24P indicator (page 47)

Lights up when outputting 1080p/24 Hz video signals of BD-ROMs.

FFront panel display (page 11)GA (open/close) (page 33)

Opens or closes the disc tray.

HN (play) (page 33)

Starts playback.

The indicator lights up during playback.

HD AUDIO indicator

Lights up in the following cases when a BD is inserted.

–when the audio codec of the title being played is Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution, or DTS-HD Master Audio.

–when the audio codec of the title being played is LPCM 2ch 192 kHz or LPCM 3ch or higher.

SBM (Super Bit Mapping) indicator

Lights up when “SBM” is set to “On” (default) in the “Video Settings” setup and video signal is output from the HDMI OUT jack (page 48).

CRemote sensor (page 28)DDisc tray (page 33)EBlu-ray Disc indicator

Lights up when a BD is recognized.

z

When the player is turned on for the first time, the Blu-ray Disc indicator lights up, then turns off when Easy Setup is complete.

IX (pause) (page 33)

Pauses playback.

The indicator lights up during pause.

Jx (stop) (page 33)

Stops playback.

To lock the disc tray (Child Lock)

You can lock the disc tray to prevent it being opened by mistake.

When the player is turned on, hold down X on the player for more than 10 seconds until “LOCKED” appears in the front panel display. The disc tray is locked.

To unlock the disc tray, hold down X on the player until “UNLOCK” appears in the front panel display.

10