Sony BDP-S5000ES Buttons, Details, Press RETURN, , and press ENTER, Available buttons, To enter characters, Adjustments and Settings, Select “Network Diagnostic” using

b

When you set the “DNS Server (Primary)”/ “DNS Server (Secondary)” addresses manually, enter the “DNS Server (Primary)” address. Otherwise, the “Internet Settings” will be set incorrectly.

If your ISP has a specific proxy server setting, select “Proxy Settings” using M/m, and press ENTER.

The “Proxy Settings” display appears. If the proxy server does not have a specific setting, go to step 8.

Set “Use of Proxy Server” to “On.”

Select “Proxy Server” and “Port,” and enter the settings.

To enter the proxy server, see “To enter characters” (page 59).

Press RETURN.

Select “Network Diagnostic” using M/ m, and press ENTER.

Select “Start,” and press ENTER.

4

5

6

7

8

9

10 Check that the message “Network connections are correct.” appears.

The setup is finished. If the message does not appear, follow the on-screen messages.

To enter characters

The display for entering characters appears when you select “Proxy Server” in “Proxy Settings.”

1Press a number button repeatedly to select a character.

Example:

Press the number 3 button once to enter “D.”

Press the number 3 button three times to enter “F.”

2Press ,, and enter the next character.

3Press the yellow button (“Finish”) to finish.

Available buttons

Buttons	Details
Red button	Switches the keyboard
(Letter Type)	between alphabet and
	numbers.
Green button	Switches the keyboard
(A/a)	between upper case and
	lower case.
Blue button	Displays the keyboard for
(Symbol)	symbols.
Yellow button	The input is entered, and
(Finish)	the player returns to the
	previous display.
CLEAR	Erases the selected
(Clear/Clear All)	character.
	To erase all displayed
	characters, press and hold
	CLEAR for 2 seconds or
	more.
RETURN	Returns to the previous
(Cancel)	display, canceling the
	input.
</M/m/,,	• Select an input function
ENTER	using </M/m/,, and
	press ENTER.
	• Enter characters as
	follows: 1Select a
	character selection panel
	using </M/m/,, and
	press ENTER. 2Select a
	character using </,,
	and press ENTER.

Adjustments and Settings

59