Audio Output Signals

The audio output differs as follows, depending on the source, output jack, and the selected settings.

 

Jacks/

Digital

 

 

 

 

Analog

 

 

settings*1

HDMI OUT jack

*2

DIGITAL OUT (OPTICAL/

MULTI

AUDIO

 

 

 

 

*2

 

 

 

 

 

 

COAXIAL) jacks

CHANNEL

OUT (L/R)

 

 

Auto*3

2ch PCM*3

Bitstream*4

PCM

OUTPUT

jacks

Disc/source

jacks*2

BD

LPCM 2ch

LPCM 2ch

LPCM 2ch

LPCM 2ch

LPCM 2ch

2ch

2ch

 

LPCM 5.1ch

LPCM 5.1ch

LPCM 2ch

LPCM 2ch

LPCM 2ch

5.1ch

2ch

 

LPCM 7.1ch

LPCM 7.1ch

LPCM 2ch

LPCM 2ch

LPCM 2ch

7.1ch

2ch

 

Dolby Digital

LPCM

LPCM 2ch

Dolby Digital/

LPCM 2ch

5.1ch

2ch

 

5.1ch*5

LPCM 2ch*6

 

Dolby Digital

LPCM

LPCM 2ch

Dolby Digital/

LPCM 2ch

7.1ch

2ch

 

Plus

7.1ch*5

LPCM 2ch*6

 

Dolby TrueHD

LPCM

LPCM 2ch

Dolby Digital/

LPCM 2ch

7.1ch

2ch

 

7.1ch*5

LPCM 2ch*6

 

DTS

LPCM

LPCM 2ch

DTS/

LPCM 2ch

5.1ch

2ch

 

5.1ch*5

LPCM 2ch*6

 

DTS-HD High

LPCM

 

 

DTS/

 

 

 

 

Resolution

7.1ch*5

LPCM 2ch

LPCM 2ch*6

LPCM 2ch

7.1ch

2ch

 

Audio

 

 

 

 

 

 

 

 

DTS-HD

LPCM

LPCM 2ch

DTS/

LPCM 2ch

7.1ch

2ch

 

Master Audio

7.1ch*5

LPCM 2ch*6

DVD

LPCM

LPCM 2ch

LPCM 2ch

LPCM 2ch

LPCM 2ch

2ch

2ch

 

Dolby Digital

Dolby Digital

LPCM 2ch

Dolby Digital

LPCM 2ch

5.1ch

2ch

 

DTS

DTS

LPCM 2ch

DTS

LPCM 2ch

5.1ch

2ch

CD

LPCM

LPCM

LPCM 2ch

LPCM 2ch

LPCM 2ch

2ch

2ch

DTS 5.1 MUSIC DISC

DTS

LPCM 2ch

DTS

LPCM 2ch

5.1ch

2ch

 

 

 

 

 

 

 

 

 

*1 When “Audio Output Priority” is set to “Stereo

Analog,” LPCM 2ch signals are output from each jack.

*2 When “Audio Output Priority” is set to “HDMI,” “Coaxial/Optical” or “Multi Channel Analog,” LPCM 2ch signals are output from jacks other than the selected jack.

*3 Auto: when “Audio (HDMI)” is set to “Auto” in the “Audio Settings” setup (page 52).

2ch PCM: when “Audio (HDMI)” is set to “2ch PCM” in the “Audio Settings” setup (page 52).

*4 Bitstream: when “Dolby Digital” is set to “Dolby Digital” or “DTS” is set to “DTS” in the “Audio Settings” setup (page 49).

*5 When “BD Audio Setting” is set to “Direct,” audio recorded by the source is output by bitstream. However, this audio may be output as follows depending on the audio formats supported by the AV amplifier (receiver).

–When the AV amplifier (receiver) does not support HD Audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio) but supports Multi-ch LPCM, up to LPCM 7.1ch is output.

–When the AV amplifier (receiver) does not support HD Audio or Multi-ch LPCM but supports Dolby Digital/DTS, a Dolby Digital or DTS bitstream is output.

–When the AV amplifier (receiver) does not support HD Audio, Multi-ch LPCM or Dolby

Digital/DTS, LPCM 2ch is output. *6 The 2-channel or less-channel primary/

secondary audio signals are output as LPCM 2ch signals.

b

When outputting 480i/480p video signals from the HDMI OUT jack, Dolby TrueHD and DTS-HD Master Audio are output as LPCM, Dolby Digital, or DTS bitstream signals even if “BD Audio Setting” is set to “Direct” in the “Audio Settings” setup (page 52).

70