52GB
Controlling Your TV or Other Components with the Supplied Remote
You can control your TV and other compo nents
such as a cable box or digital satellite receiver
with the supplied remote. The remote is initially
set to control Sony components.
You can control non-Sony components by
changing the preset code of the remote. For
operation, see “Changing the preset code of the
remote (Preset mode)” (page52).
•When you replace the batteries of the remote, the
remote setting may be reset to the default (SONY)
setting.
1Press the TV or STB operation mode
button that matches the component
you want to control.
2Press the appropriated buttons listed
in the following table.
•z: The button can be used with the
default setting of the remote.
•a: The button can be used when you
change the preset code of the remote.
•In TV or ST B mode, if you press any of the buttons
above, the TV or STB operation mode button lights
up. (However, depending on the code setting, some
buttons may not work, and the TV or STB operation
mode button may not light up.)
•If you press other than the buttons above when the
remote is in TV or STB mode, the TV or STB
operation mode button does not light up.
•Depending on th e TV or component, you may not be
able to use some of the buttons.
1Press HOME.
The home menu appears on the TV screen.
2Press C/c to select [Setup].
3Press X/x to select [Remote Controller
Setting Guide], then press .

Controlling your components

with the supplied remote

Button Remote’s mode
TV STB
AV "/1zz
Number buttons zz
/zz
ENTER (-)za
za
zz
SLEEP (t/)zz
Color buttons
(red/green/
yellow/blue)
zz
TOP MENU
()
zz
zz
POP UP/MENU aa
C/X/x/c, zz
RETURN zz
HOME (MENU) zz
OPTIONS
(TOOLS)
za
SOUND MODE
()
za
./>za
za
m/Mza
Nza
Xza
xza
zz
2 +/– zz
PROG +/–
(c/C)
zz
DISPLAY
(/)
zz

Changing the preset code of

the remote (Preset mode)

Button Remote’s mode
TV STB