Additional Information
73GB
USB deviceBRAVIA Internet Video“BRAVIA” Sync ([Control for HDMI]) Network connection
Symptom Problems and solutions
The USB device is not
recognized.
•Try the follo wing: 1 Turn the system off. 2 Remove and reconnect the USB
device. 3 Turn the system on.
•Make sure that the USB device is securely connected to the (USB) port.
•Check if the USB device or a cabl e is damaged.
•Check if the USB device is on.
•If the USB device is connecte d via a USB hub, disconnect it and connect the
USB device directly to the main unit.
Symptom Problems and solutions
The picture/sound is poor/certain
programs display with a loss of
detail, especially during fast-
motion or dark scenes.
•Picture/sound quality may be poor depending on Internet content providers.
•Picture/sound quality may be improved by changing the conn ection speed.
Sony recommends a connection speed of at least 2.5 Mbps for standard-
definition video and 10 Mbps for high-definition video.
•Not all videos contain sound.
The picture is small. • Press X to zoom in.
Symptom Problems and solutions
The [Control for HDMI]
function does not work
(“BRAVIA” Sync).
•Check that [Control for HDMI] is set to [On] (page 65).
•If you change the HDMI connecti on, turn the system off and on again.
•If power failure occurs, set [Control for HDMI] to [Off], then set [Control for
HDMI] to [On] (page65).
•Check the f ollowing and refer to the operating instructions s upplied with the
component.
– the connected co mponent is compatible with the [Control for HDMI]
function.
– the connected compone nt’s setting for the [Control for HDMI] function is
correct.
Symptom Problems and solutions
The system cannot connect to the
network.
•Check the ne twork connection (page 23) and the network setting s (page 66).