1-30 (E) BKP-7933
Setting from the S-BUS Primary Station
1. Select the menu item “Z:BKP-7933 CONFIGURA-
TION” and press [ENTER].
SONY ROUTING SYSTEM SETUP MENU BKP-7933 V1.00 STATION NUMBER 2
MODIFICATION COMMAND
A: SET UNIT LOCATION(CAM-CCU) B: SET UNIT LOCATION(CCU-RCP)
C: SET UNIT LOCATION(MSU)
K: RESET TO DEFAULT TABLE
MAINTENANCE COMMAND
Z: BKP-7933 CONFIGURATION
Ctrl-D RETURN
BKP-7933 CONFIGURATION BKP-7933 V1.00 STATION NUMBER 2
S-BUS CONFIGURATION
A: ROUTER PIX1 ASSIGN B: ROUTER WF1 ASSIGN
C: ROUTER PIX2 ASSIGN D: ROUTER WF2 ASSIGN
E: ROUTER PIX3 ASSIGN F: ROUTER WF3 ASSIGN
G: S-BUS TALLY H: BKP-7933 MODE
Ctrl-E RETURN TO MENU
2. Select “G: S-BUS TALLY” using the cursor key and
press [ENTER].
3. Move the cursor key to the desired position to be
changed and press [ENTER]. (The display enters the
input mode.)
4. Input the SOURCE No. using the numeric keys and
press [ENTER]. At this time, assign the SOURCE
No. that has already been set by the system, to the
camera number.
m
.Any number in the range of 1 to 512 can be set.
.Up to four group tallies can be set.
.The installation shows the display on which the tally
signal of the SOURCE No. 0001 is assigned to the
Camera No.1.
1-7. Setting Up
BKP-7933 CONFIGURATION BKP-7933 V1.00 STATION NUMBER 2
SBUS TALLY SOURCE
CNU GROUP No SOURCE No
(Camera No.)
0 ( 1) 1_0001 2_0000 3_0000 4_0000
0 ( 2) 1_0002 2_0000 3_0000 4_0000
0 ( 3) 1_0003 2_0000 3_0000 4_0000
0 ( 4) 1_0000 2_0000 3_0000 4_0000
0 ( 5) 1_0000 2_0000 3_0000 4_0000
0 ( 6) 1_0000 2_0000 3_0000 4_0000
1 ( 7) 1_0000 2_0000 3_0000 4_0000
1 ( 8) 1_0000 2_0000 3_0000 4_0000
1 ( 9) 1_0000 2_0000 3_0000 4_0000
1 (10) 1_0000 2_0000 3_0000 4_0000
1 (11) 1_0000 2_0000 3_0000 4_0000
1 (12) 1_0000 2_0000 3_0000 4_0000
F1:F2: F3:PgUp F4:PgDn Ctrl-E RETURN TO MENU