Sony BM-850T Telephone Recording, Connect the TL-4 not supplied to the unit 2 Set POWER to ON

Telephone Recording

To record telephone conversation, connect the optional TL-4 telephone recording adaptor* to the TELEPHONE PICKUP jack. For further details, refer to the

1		REC/ERASE 3
	Telephone

instruction manual of the telephone recording adaptor.

*The TL-4 cannot be used on some telephones.

TL-4 (not

BM-850 supplied)

Rear

to TELEPHONE PICKUP

5

2

p STOP 4

At the beginning of telephone recording

LTR signal is automatically recorded for about 3 seconds and the telephone recording begins at the same time.

While the LTR signal is being recorded (for about 3 seconds), the unit cannot be stopped even though the STOP button is pressed.

During telephone recording

Only the LTR, SEC and STOP buttons are operative.

Note

If the TEL REC button is pressed when the telephone recording adaptor, etc. is not connected, the beep tone will be heard and the recording will not start.

1 Connect the TL-4 (not supplied) to the unit.

2 Set POWER to ON.

3 Insert a cassette. (See page 7.)

4 Set TAPE SPEED to the desired tape speed.

5 Keep TEL REC pressed for more than a second. Telephone recording begins. REC/ERASE lamp blinks and ( appears on the display window.

To stop the tape

Press p STOP.

Operations 17

BM-850D/T 3-757-398-32 U E