Pairing
What is pairing? | Procedures of pairing |
Bluetooth devices need to be “paired” with each other beforehand.
Once Bluetooth devices are paired, there is no need for pairing again, except in the following cases:
•Pairing information is deleted after repair, etc.
•This unit is paired with 9 or more devices.
This unit can be paired with up to 8 devices; if a new device is paired after 8 devices have been paired, the device whose latest connection time is the oldest among the 8 paired devices is replaced by the new one.
•When recognition of the unit by the device to be connected is deleted.
•This unit is initialized (page 26). All pairing information is deleted.
1Place the Bluetooth device within 1 m (3 ft) of this unit.
2Press and hold the POWER button for
7 seconds or more to standby for pairing while the unit is turned off.
Notes
•After about 3 seconds, power is turned on and the indicator (blue) and indicator (red) flash together twice. Keep the POWER button pressed without releasing. The indicator (blue) starts flashing. When both indicators start flashing together again, release the button. This unit enters into pairing mode.
•If pairing is not established within about 5 minutes, pairing mode will be cancelled and this unit will turn off. In this case, start over from step 1.
Continued 11