3Perform pairing procedure on the Bluetooth device to detect this unit.

The list of detected devices appears on the display of the Bluetooth device. This unit is displayed as “DR-BT22.”

If “DR-BT22” is not displayed, repeat from step 1.

Notes

•For details, refer to the operating instructions supplied with the Bluetooth device.

•When pairing with a Bluetooth device that cannot display a list of detected devices or that has no display, you may pair the device by setting both this unit and the Bluetooth device to pairing mode. At this time, if passcode is set besides “0000” on the Bluetooth device, pairing cannot be done with this unit.

4Select “DR-BT22” on the display of the Bluetooth device.

5If Passcode* input is required on the display of a Bluetooth device, input “0000.”

Pairing is complete when the indicator (blue) flashes slowly. The message standing for “Pairing complete” appears on the display of some Bluetooth devices.

*Passcode may be called “Passkey,” “PIN code,” “PIN number,” or “Password.”

6Start the Bluetooth connection from the Bluetooth device.

This unit memorizes the device as the last connected device. Some Bluetooth devices may connect with the unit automatically when pairing is complete.

Tips

•To pair with other Bluetooth devices, repeat steps 1 to 5 for each device.

•To delete all pairing information, see “Initializing the unit” (page 26).

12