Inserting a Break Event (Presentation Application)
The Presentation Application allows you to insert a break event, a point at which playout pauses, in the playlist. Playout of the playlist resumes from the event following to the break event when you start playout using the remote controller of the network player.
1
A break event is inserted. It appears as a gray strip in the playlist. The start time of the event that is immediately after the break becomes 00:00:00.
Deleting a Break Event
Undoing the last Operation
Hold the Ctrl key down and press the Z key to cancel the last operation.
Changing the Start Time of an Event (Scheduling Application)
There are two purposes to changing the start time.
The first is to make a break (during which nothing is played) during playout. The software always calculates the start time of each event according to the start time of the first event and the event's duration. Shifting the time displayed in the Start Time column to a later time makes a break. In this case, the start time of all events on the same line are simultaneously changed.
The second purpose is to adjust the start time of a single event. In this case, only the start time of the selected event changes, and no other event is affected.
Changing the Start Time to Make a Break
Note
The start time of an event can be from 00:00:00 to 47:59:59, however, the start time of the first event in a playlist must be before 24:00:00.
1
The start time can now be edited.
2Add the duration of the break to the current start time, adjust the start time to accommodate the change, then press the Enter key.
A gray strip that indicates a break appears immediately above the selected event. All the start times of the subsequent events are recalculated.
Changing the Start Time of the Selected Event Only
Note
This operation adjusts the start time of an event and cannot be used to move the event on the playlist.
64