2Specify the position.

Select the pre-defined settings for the video position, size, and text position, or enter the desired values in the text boxes.

You can also move or change the size of the text or video on the picture of a monitor displayed in the Display Setup dialog box to specify the settings.

Check the Preserve Aspect Ratio check box to fix the video aspect ratio at 3:2 (NTSC) or 5:4 (PAL).

3Click [OK].

The settings are specified in the selected event and the Display Setup dialog box closes.

Hint

Clicking [Apply] before clicking [OK] shows you the result. This is helpful when entering the position or size value.

Undoing the last Operation

Hold the Ctrl key down and press the Z key to cancel the last operation.

Saving the Position Setting as a Selection

The system allows you to save up to 30 settings each for the video position, video size, and text position. This is useful to use the same position setting in many events.

1In the Display Setup dialog box, enter the desired name for the setting in the Video Position, Video Size, or Text Position drop-down list box.

2Enter the desired setting in the corresponding text box(es).

You can move or change the size of the text or video on the picture of a monitor displayed in the Display Setup dialog box to specify the settings, too.

3Click [Save] corresponding to the item(s).

Note

•When you click [OK], the system automatically saves the setting with the name "User defined," even if you do not save it.

•If you do not want to apply the saved setting(s) to the default, or the event selected to open the dialog box, click [Cancel], not [OK] to close the dialog box.

•To delete a saved setting, select it in the Display Setup dialog box, then click the corresponding [Delete].

66