Chapter 3

Setting up the Keypad

This chapter provides you with information regarding installation, hookup and settings for the optional Keypad.

Installing the Keypad

A Keypad must be installed in a junction box (not supplied). Follow the procedures below to mount a Keypad mounting bracket and a Keypad on the wall.

Installing the Keypad

1Place the Keypad mounting bracket over a junction box which has already been installed on the wall with the mounting lips facing out.

2Attach the Keypad mounting bracket to the junction box with the supplied screws at the four points as shown below.

Proceed to the steps in “Zone related cables hookups” on page 18 before mounting the Keypad.

Note

The Keypad mounting bracket may not fit easily over some junction boxes. In this case, loosen the screws and move the Keypad mounting bracket left to right to center on the junction box.

26US