Testing Learned Remote Code – CHECK Mode
You can check to see if the remote code of the source component have been successfully learned by the Main Unit.
1Press SOURCE SELECT +/– to select the source component that you want to check.
2Press MODE repeatedly until “<<CHECK>>“ appears in the display window, then press ENTER.
“SET COMMAND” appears for a few seconds, then some of the learned remote codes appear in the display window.
3Press the R cursor or r cursor repeatedly to select the remote code that you want to check (ex. play, stop).
4Press ENTER.
The selected remote command will be performed.
Customizing the Main Unit
– INSTALLATION Mode
Viewing disc information– DISC SEARCHBy connecting a Sony DVD Mega Changer to an RS232C jack, or a Sony CD Mega Changer to CONTROL A1II, you can view disc information, such as a disc title.
1Turn off the power.
2Press and hold MODE and the T cursor simultaneously, and then turn on the power.
“DISC SEARCH” appears in the display window for a few seconds, then, “DVD MEGA” appears.
3Press the R cursor or r cursor to select “DVD MEGA” or “CD MEGA”.
4Press ENTER.
“SEARCHING NOW…” appears and flashes while the Main Unit is searching for the disc information. “COMPLETED!” appears after the information has been received, and a DVD Mega Changer or a CD Mega Changer turns off automatically.
“FAILED!” appears when information is not found or cannot be read.
5Press ENTER when you have finished.
The display returns to the NORMAL mode.
up Setting
Main the Unit