Charging the battery pack

Charge the battery pack on a flat surface without vibration. The supplied battery pack NP-F10 is charged a little at the factory. To charge the battery pack, use the supplied AC-VF10 AC adaptor/charger.

(1) Fit and slide the battery pack in the direction of the arrow.

(2) Connect the power cord to the AC adaptor/charger and a wall outlet. The CHARGE lamp (orange) lights up. Charging begins.

When the CHARGE lamp goes out, normal charge is completed. For full charge, which allows you to use the battery longer than usual, leave the battery pack attached for about 1 hour after normal charge is completed.

12

To remove the battery pack

Slide the battery pack in the direction of the arrow.

Charging time

When using the NP-F10 rechargeable battery pack:

Charging time*

145 (85) minutes

The number in parentheses indicates the time when you use a normally charged battery.

*Approximate minutes to charge an empty battery pack using the supplied charger. (Lower temperatures require a longer charging time.)

started Getting

11US