75
Troubleshooting Felsökning
The battery remaining indicator does
not indicate the correct time.
In the playback mode
Symptom Cause and/or Corrective Actions
•The POWER switch is set to CAMERA or OFF (CHARGE).
cSet it to PLAYER. (p. 36)
•The tape has run out.
cRewind the tape. (p. 23)
•The television’s video channel is not adjusted correctly.
cAdjust it. (p. 34)
•EDIT is set to ON in the menu settings.
cSet it to OFF. (p. 65)
•The video head may be dirty.
cClean the heads using the Sony V8-25CLD cleaning cassette
(optional). (p. 92)
In the recording and playback modes
Symptom Cause and/or Corrective Actions
•The battery pack is not installed, or is dead or nearly dead.
cInstall a charged battery pack. (p. 14, 15)
•The AC power adaptor is not connected to the mains.
cConnect the AC power adaptor to the mains. (p. 19)
•The operating temperature is too low.
•The battery pack is not fully charged.
cCharge the battery pack fully again. (p. 15)
•The battery pack is completely dead, and cannot be recharged.
cReplace with a new battery pack. (p. 14)
•You have used the battery pack in an extremely hot or cold
environment for a long time.
•The battery pack is completely dead, and cannot be recharged.
cReplace with a new battery pack. (p. 14)
•The battery is not fully charged.
cCharge the battery pack fully again. (p. 15)
•A deviation has occured in the remaining battery time.
cCharge the battery pack fully again. (p. 15)
•A deviation has occured in the remaining battery time.
cCharge the battery pack fully again. (p. 15)
•The power source is disconnected.
cConnect it firmly. (p. 14, 19)
•The battery is dead.
cUse a charged battery pack. (p. 14, 15)
•Moisture condensation has occurred.
cRemove the cassette and leave your camcorder for at least 1
hour to acclimatize. (p. 91)
(Continued on the following page)
Types of trouble and their solutions
The tape does not move when a
video control button is pressed.
The playback picture is not clear or
does not appear.
The power does not turn on.
The battery pack is quickly
discharged.
The % and Z indicators flash and no
functions except for cassette ejection
work.
The cassette cannot be removed from
the holder.
The power goes off although the
battery remaining indicator indicates
that the battery pack has enough
power to operate.