Sony CCD-TR86, CCD-TR916, CCD-TR96 To watch the demonstration, (1), (2), (3), (1), (2), (3), To exit Demo mode, To enter Demo mode, Notes on the Remote Commander

Identifying the parts

Notes on the Remote Commander

•Keep the remote sensor away from strong light sources such as direct sunlight or illumination. Otherwise, the remote control may not be effective.

•Be sure that there is no obstacle between the remote sensor on the camcorder and the Remote Commander.

•This camcorder works at commander mode VTR 2. The commander modes (1, 2, and 3) are used to distinguish this camcorder from other Sony VCRs to avoid remote control misoperation. If you use another Sony VCR at commander mode VTR 2, we recommend you change the commander mode or cover the remote sensor of the VCR with black paper.

To watch the demonstration

You can start the demonstration by setting in the menu system.

You can also start the demonstration by the following operation.

To enter Demo mode

(1)Eject the cassette and set the POWER switch to PLAYER.

(2)Turn STANDBY up.

(3)While holding down (set the POWER switch to CAMERA.

To exit Demo mode

(1)Set the POWER switch to PLAYER.

(2)Turn STANDBY up.

(3)While holding down pset the POWER switch to CAMERA.

information Additional

67