Identifying the parts

1

!º

 

 

!¡

2

!™

3

!£

4

!¢

5

!￿

6

!§

7

!¶

 

8

!•

9

 

1Intelligent accessory shoe

2POWER switch (p. 11)

3LCD BRIGHT buttons (p. 16)

4Display window (p. 81)

5NEAR/FAR dial (p. 37)

6FOCUS switch (p. 37)

7Tripod receptacle (p. 19)

Make sure that the length of the tripod screw is less than 9/32 inch (6.5 mm) otherwise, you cannot attach the tripod securely and the screw may damage the camcorder.

8OPEN button (p. 16)

9VOLUME buttons (p. 22)

0Eyecup

!¡ Viewfinder lens adjustment lever

(CCD-TRV72/TRV82 only) (p. 12)

!™ Power zoom lever (p. 14)

!£ BATT RELEASE (PUSH) lever (p. 9) !¢ Hook for shoulder strap (p. 80) !￿ STANDBY switch (p. 11)

!§ START/STOP button (p. 11) !¶ Battery mounting surface

!• Hook for shoulder strap (p. 80)

Note on the intelligent accessory shoe

Supplies power to optional accessories such as a video light or microphone. The intelligent accessory shoe is linked to the STANDBY switch, allowing you to turn on and off the power supplied by the shoe. Refer to the instruction manual of the accessory for further information. To connect an accessory, press down and push it to the end, and then tighten the screw. To remove an accessory, loosen the screw, and then press down and pull out the accessory.

74