Warning indicators

If indicators flash in the viewfinder or in the display window, check the following: ￿: you can hear the beep sound when the BEEP is set to ON.

123

5min

0min

456

NO

C:21:00

CASSETTE

789

CLEANING

C:31:00

CASSETTE

 

JUL 4 1997

1The battery is weak or dead.

Slow flashing: The battery is weak.

Fast flashing: The battery is dead.

2The tape is near the end.

The flashing is slow.

3The tape has run out.

The flashing becomes rapid.

4No tape has been inserted.

5The tab on the tape is out (red).

6Moisture condensation has occurred.

7The video heads may be contaminated.

8Some other trouble has occurred.

Use the self-diagnosis function (p.72).

If the display does not disappear contact your Sony dealer or local authorized Sony service facility.

9The lithium battery is weak or is not installed.

To watch the demonstration

You can start the demonstration by setting DEMO MODE in the menu system. You can also start the demonstration by the following operation.

To enter demo mode

(1) Eject the cassette and set the POWER switch to VTR.

(2) Turn STANDBY up to STANDBY.

(3) While holding down ·set the POWER switch to CAMERA.

To exit demo mode

(1) Set the POWER switch to VTR.

(2) Turn STANDBY up to STANDBY.

(3) While holding down ￿set the POWER switch to CAMERA.

82