Local mode
Local mode allows you to tune in only to strong stations during Seek Tuning.
1Press LO before you start seek tuning.
“LO” appears in the display.
To return to Distant mode, press LO again.
“LO” disappears and the unit tunes in to all receivable stations.
Using preset stations
You must preset stations before you can tune in a station using preset station number buttons.
Presetting stations manually
(Manual Memory)
1Press FNC repeatedly to select the desired band (FM1, FM2, FM3, AM1 or AM2).
2Press TUNEi or TUNEk to tune in to a desired station (see “Tuning in to a station,” page 3).
3Press the desired preset station button until the unit beeps.
Note
A newly preset station replaces the station on the same band that was previously stored on that preset station button.
Preset station buttons 1 ~ 6
Preset station number
Presetting stations automatically
(Auto Memory)
1Press FNC repeatedly to select the desired band (FM1, FM2, FM3, AM1 or AM2).
2Press and hold PS/A.ME until automatic presetting starts.
The unit automatically stores up to 6 stations for each band.
After completion of automatic presetting, the unit
tunes in to the station stored on preset station button 1.
To cancel automatic presetting, press PS/A.ME again.
Checking the preset stations (Preset Scan)
1Press PS/A.ME briefly.
Each preset station will be tuned in for 5 seconds in order.
To cancel Preset Scan, press PS/A.ME again or any
preset station button.
Tuning in to a preset station
1Press FNC repeatedly to select the desired band (FM1, FM2, FM3, AM1 or AM2).
2Press the preset station button on which the desired station is stored.
Active tuning reception control (ATRC)
The unit automatically suppresses FM noise caused by vehicle movement, and maintains sound quality.
Using the timer
(My Information)
You can schedule the radio to activate for daily radio programs. The unit automatically turns on and off in Radio mode at the scheduled times.
MY INFO indicator
Smart Jog
Setting the timer
1Turn off the unit.
2Press and hold INFO until “PO” flashes in the display.
3Press SEL.
4Set the time you wish the unit to turn on.
•Press TUNEiand turn the Smart Jog to set the hour.
•Press TUNEk and turn the Smart Jog to set the minute.
5Press SEL.
6Press FNC to select the band.
7Press TUNEi, TUNEkor the desired preset station button to select the station.
8Press SEL.
9Set the time you wish the unit to turn off following the same procedure used in step 4.
ENGLISH 4
