Ver 1.1 2001.07 | SECTION 4 |
| TEST MODE |
ADJ MODE
NOTE: This mode cannot be performed without a general remote com- mander.
1.Chuck the CD first, and then turn OFF the power.
2.
3.Press the [POWER] button to turn ON the power.
The CD is playback automatically and the ADJ mode is set.
4.To exit the mode, press the [POWER] button to turn OFF the power.
•Prohibits high speed search during accessing
•Ignores even if GFS becomes “L”
ADJ Mode Special Function Table
Button | Function | |
PLAY MODE | Auto gain display | |
(Focus, Tracking and Sledding) | ||
| ||
|
| |
EDIT | RFCK → GFS → Error rate display | |
|
|
Connecting Location:
– MAIN BOARD (Component Side) –
FLUORESCENT INDICATOR TUBE ALL LIT, AND KEY CHECK MODE
1.
2.Press the [POWER] button to turn ON the power. The whole fluorescent indicator tube lights up.
3.All buttons have individual button numbers.
When a button is pressed, the button number is counted up and displayed.
JW66
TP1 (ADJ) | CN301 |
|
1 0
JW68
Count up display | Displays button number |
TP2 (AFADJ)
When remote controller signals are received, “RM **” will be displayed.
(** are the numbers corresponding to the remote controller buttons.)
When using the remote controller, switch the [CD1/2/3] switch to CD1.
4.To exit the mode, press the [POWER] button to turn OFF the power.
10
