JVC CA-DXU8, CA-DXU10 manual Creating Your Own Sound Modes User Mode, USER1/2/3

Selecting the Sound Modes

You can select one of the preset Sound Modes.

SEA Modes

SOUND		ROCK		POP	CLASSIC		DANCE
MODE
	FLAT			USER1–3		STADIUM		HALL
						Surround Modes*
SEA (Sound Effect Amplifier) Modes
ROCK			Boosts low and high frequency. Good for
			acoustic music (initial setting).
POP			Good for music with an emphasis on vocal.
CLASSIC			Good for classical music.
Surround Modes*
DANCE			Increases resonance and bass.
HALL			Adds depth and brilliance to the sound.
STADIUM			Adds clarity and spreads the sound, as in an
			outdoor stadium.
User Modes
USER1/2/3			Your individual mode stored in memory.
			See the next column “Creating Your Own
			Sound Modes–User Mode.”

* Surround elements are added to the SEA elements to create being-there feeling in your room.

•While one of the Sound Modes is activated, S. MODE indicator lights up.

•While one of the Sound Modes with surround effect is

activated, indicator lights up.

To cancel the Sound Mode, select “FLAT.”

Creating Your Own Sound Modes
—User Mode	Remote	INFO

ONLY

You can adjust the preset Sound Modes to create your own Sound Modes which suit your taste. The changed settings can be stored as the USER1, USER2 and USER3 Modes.

While “USER1,” “USER2” or “USER3” is shown on the

display...

1

ENTER /SET

2Select the SEA parameter you want to adjust.

1 BASS (Bass).

2 MID (Mid-range).

3 TRE (Treble).

3Adjust the parameter.

ENTER /SET

•You can adjust the level from –3 to +3.

•Repeat steps 2 and 3 to adjust other parameters.

4Select one of the User Modes.

USER1 USER2

USER3

5Store the setting.

ENTER /SET

•You can adjust the SEA pattern temporarily by doing the operations in steps 1 to 3.

The adjustment is cleared when you change the sound mode to another mode.

•To create your own Sound Mode with surround effect, select DANCE, HALL or STADIUM first, then go through steps 1 to 5.

14