JVC CA-DXU8, CA-DXU10 manual Time Search, Chapter/Track Search, Enter the time

6 Select the end point (B).

A-B Repeat starts. The selected

ENTERportion plays repeatedly.

/SET

To cancel A-B Repeat, repeat steps 1 to 3, and select “OFF” in step 4.

Time Search

You can move to a particular point by specifying the elapsed playing time from the beginning.

1While playing a disc (without PBC for SVCD/VCD), display the on-screen bar with the pull-down menu.

•All disc except DVD: Time Search can be used before starting playback.

2Select .

3Display the pop-up window.

DVD-VIDEO	Dolby D	DISC 1 TITLE 2		CHAP 3 TOTAL	1:01:58
	3/2.1ch
TIME	OFF	CHAP.	1/3	1/ 3	1/1
	TIME	_ : _ _ : _ _

4Enter the time.

You can specify the time in hours/minutes/seconds.

Chapter/Track Search

You can search for the number of the item to play. For DVD Video/DVD-VR: Chapter

For DVD Audio: Track

1While playing a disc, display the on-screen bar with the pull-down menu.

2 Select CHAP. or TRACK .

3 Display the pop-up window.

DVD-VIDEO	Dolby D	DISC 1 TITLE 2		CHAP 3 TOTAL	1:01:58
	3/2.1ch
TIME	OFF	CHAP.	1/3	1/ 3	1/1
		CHAPTER	_

4 Enter the desired chapter/track number.

1	2	3	Examples:
			To select 5, press 5.
4	5	6	To select 15, press 1, then 5.
7	8	9	To select 30, press 3, then 0.
10	0	10

•To correct a misentry, press the number buttons until the desired number is shown in the pop-up window.

5 Finish the setting.

1 2 3

4 5 6

7 8 9

10 0 10

Examples:

To move to a point of 1 (hours): 02 (minutes): 00 (seconds), press 1, 0, 2, 0, then 0.

To move to a point of 54 (minutes): 00 (seconds), press 0, 5, 4, 0, then 0.

ENTER	The System starts playing the
/SET
	searched chapter or track.

•It is always required to enter the hour digit (even “0” hour), but it is not required to enter trailing zeros (the last two digits in the examples above).

•To correct a misentry, press cursor 2 to erase the last entry.

5 Finish the setting.

ENTER

/SETThe System starts playing from the specified time.

26