JVC CA-DXU8 manual Setting the Clock, To adjust the picture tone, Changing the Display Brightness

To adjust the picture tone

1Select “USER1” or “USER2.”

• Follow steps 1 and 2 on page 15.

2Select a parameter you want to adjust.

	ENTER
	/SET
GAMMA	Adjust if the neutral color is bright
	or dark. The brightness of dark and
	bright portions is maintained
	(–3 to +3).
BRIGHTNESS	Adjust if the picture is bright or dark
	as a whole (–8 to +8).
CONTRAST	Adjust if the far and near position is
	unnatural (–7 to +7).
SATURATION	Adjust if the picture is whitish or
	blackish (–7 to +7).
TINT	Adjust if the human skin color is
	unnatural (–7 to +7).
SHARPNESS	Adjust if the picture is indistinct
	(–8 to +8).

3Adjust the parameter.

ENTER /SET

4Repeat steps 2 to 3 to adjust other parameters. To erase the VFP screen, press VFP again.

Changing the Display Brightness		Remote
		ONLY
DIMMER	DIMMER 1 DIMMER	2

DIMMER OFF

(Canceled)

DIMMER 1 Dims the display and the illumination* on the main unit.

DIMMER 2 Dims the display (more than DIMMER 1) and turns off the illumination* on the main unit.

*Excluding the KARAOKE SCORING lamp and VARIO BASS lamp (if they are in use.).

Setting the Clock	Remote	INFO
	ONLY

Without setting the built-in clock, you cannot use any timers except the Sleep Timer.

•To exit from the clock setting, press CLOCK/TIMER as required.

•To correct a misentry during the process, press CANCEL. You can return to the previous step.

1Activate clock setting mode.

CLOCK/

TIMER

•If you have already adjusted the clock before, press the button repeatedly until the clock time starts flashing.

2Adjust the hour, then minute.

ENTER /SET

Now the built-in clock starts working.

To display the clock during playback

For “DVD/CD” and “USB”:

DISPLAY Disc/file type Clock

Playback information

For “TAPE,” “TUNER AM,” “TUNER FM” and “AUX”:

DISPLAY Current source information

Clock

16