JVC CA-DXU10 Adjusting the Volume, Listening to the Radio, To tune in to a station, Tuner Fm

Adjusting the Volume

The volume level can be adjusted in 32 steps (VOLUME MIN, VOLUME 1 – VOLUME 30, and VOLUME MAX).

Remote control:	Main unit:
AUDIO
VOL
To drop the volume in a moment		Remote
		ONLY

FADE

MUTING

To restore the volume, press again or adjust the volume level.

Listening to the Radio INFO

To select the AM tuner interval spacing

Main Unit

ONLY

Some countries space AM stations 9 kHz apart, and other countries use 10 kHz spacing.

To tune in to a station

While FM or AM is selected...

1sec.

SLOW

Increases the frequency.

Decreases the frequency.

Frequency starts changing on the display.

When a station (frequency) with sufficient signal strength is tuned in, the frequency search stops.

•When you repeatedly press the button, the frequency changes step by step.

To manually stop the searching, press either button.

		Remote
If the FM reception is poor		ONLY
FM/PLAY MODE	The MONO indicator lights on the
	display. Reception will improve though
	stereo effect is lost—monaural reception
	mode.
	To restore the stereo effect, press the
	button again (the MONO indicator goes
	off).

1Select “TUNER-AM,” then turn off (standby) the System.

To preset stations

Remote

ONLY

TUNER FM

TUNER AM

2Select the AM tuner interval spacing. To select 9 kHz:

(while holding...)

To select 10 kHz:

(while holding...)

To select the band (FM/AM)

FM/AM/AUX TUNER FM TUNER AM

AUX

You can preset 30 FM and 15 AM stations.

1Tune in to a station you want to preset.

•You can also store the monaural reception mode for FM preset stations if selected.

2Activate the preset number entry mode.

ENTER /SET

•Finish the following process while the indication on the display is flashing.

•To cancel the operation during procedure, press

CANCEL.

3Select a preset number for the station you store.

1	2	3	• To select a number, see “How to
4	5	6	select a number” on page 8.
			• You can also use ¢/4 buttons.
7	8	9
10	0	10

9