Press and release SB1.
4. After cloning is completed, the Source radio will |
sound either a ‘pass’ tone (cloning was successful) |
or a ‘fail’ tone (cloning process has failed). The |
‘pass’ tone sounds like a good key ‘chirp’ whereas |
the ‘fail’ tone sounds similar to a ‘bonk’ tone. If the |
Source radio is a display model, it will either show |
‘Pass’ or ‘Fail’ on the display (a tone will be heard |
within 5 seconds). |
!
W A R N I N G
Paired Target radios and Source Readios must be of the same type in order for the cloning to run successfully.
5. Once you have completed the cloning process, |
turn the radios OFF and ON to exit the ‘cloning’ |
mode. |
If cloning fails please refer to ”What to do if |
cloning fails” on page 47. |
Further details on how to clone units are explained in the instructions sheet provided with the MUC.
When ordering the MUC
See ”Chargers” on page 59 for the MUC part number.
Note: (*) MUC pockets numbers should be readfrom left to right with the Motorola logo facing front.
Cloning Radio using the Radio to Radio (R2R) Cloning Cable (optional accessory)
PROGRAMMING FEATURES
45English
