Motorola XTNI manual Status LED Status Comments

Charging a Radio and Battery Using a Multi- Unit Charger-MUC (Optional Accessory)

The Multi-Unit Charger (MUC) allows drop-in charging of up to 6 radios or batteries. Batteries can be charged with the radios or removed and placed in the MUC separately. Each of the 6 charging pockets can hold a radio or battery, but not both.

1.Place the charger on a flat surface.

2.Insert the power cord plug into the jack on the MUC.

3.Plug the cord into an AC outlet.

4.Turn the radio OFF.

5.Set removable bracket for battery type.

6.Insert the radio or battery into the charging pocket.

Notes:

•This Multi-Unit Charger will also allow you to clone up to 3 radios (3 Source radios and 3 Target radios).

•When cloning, the MUC does not need to be plugged into a power source, but all radios require charged batteries. Further details on MUC’s operation are explained in the Instructions Sheet provided with the MUC. Refer to the “Accessories” section to identify the part number for ordering the MUC.

	MUC LED Indicator
Status	LED Status	Comments
Charging	Steady Red	The charger is
	Indication	currently charging
Charge	Steady Green	Battery is fully
Complete	Indication	charged
Battery Fault	Red Fast	Battery had a fault
		when battery was
(*)	blinking
		inserted

(*)Normally re-seating the battery pack will correct this issue.

BATTERIES AND CHARGERS

23English