PROGRAMMING FEATURES
CLONING RADIOS
You can copy XTNi™ Series radio profiles from one Source radio to a Target radio by using any of these 3 methods:
1.One Multi Unit Charger (optional accessory)
2.Two single unit chargers and a
3.the CPS
Cloning with a Multi-Unit Charger (MUC)
To clone radios using the MUC, there must be at least two radios:
•a Source radio(radio to be cloned or copied) and
•a Target radio (radio which profile will be changed to be the same as the source radio.)
The Source radio has to be in Pocket 1, 3 or 5 while the Target radio to be cloned has to be in Pockets 2, 4 or 6, matching the MUC’s pockets
by pairs as follows: 1 and 2 or 3 and 4 or 5 and 6.
When cloning, the MUC does not need to be plugged into a power source, but ALL radios require charged batteries.
Follow these steps for cloning:
1.Turn ON the Target radio and place it into one of the MUC Target Pockets
2.Power the Source radio following the sequence below:
- Long press the PTT button and SB2 simulta- neously while turning the radio ON.
- Wait for 3 seconds before releasing the buttons until a distinctive audible tone is heard.
3.Place the Source radio in the source pocket that pairs with the target pocket you chose in step 1.
English 44
