Using the CD display (continued)
Tip
Some CD TEXT discs have a feature to play only the highlights of the discs.
Press
“HIGH LIGHT” appears momentaly in the display while playing disc highlights.
Notes
•The display may not show all the characters depending on the disc.
•This player can only display the disc titles, track titles and artist names from CD TEXT discs. Other information cannot be displayed.
Replacing Discs While
Playing a Disc
You can open the disc tray while playing a disc so that you can check what discs are to be played next and replace discs without interrupting playback of the current disc.
1 Press EX-CHANGE.
The disc tray opens and two disc compartments appear. Even if the player is playing a disc, it doesn’t stop playing.
2 Replace discs in the compartments with new ones.
The player plays the disc on the left side compartment after the current disc, and then the one on the right side compartment.
3 Press DISC SKIP.
The disc tray turns and other two disc compartments appear.
4 Replace discs in the compartments with new ones.
5 Press EX-CHANGE.
The disc tray closes.
While the disc tray is open by pressing the EX-CHANGE button
•If the playback of the current disc ends, the player stops playing. If the disc is played in
1 DISC Repeat Play mode (see page 10), the current disc starts playing again.
•In ALL DISCS Shuffle Play mode (see page 9), tracks are reshuffled on the current disc.
•In Program Play mode (see page 13), only the tracks on the current disc are played.