Adjusting the Recording
Level (Peak Search)
The player locates the highest level among the tracks to be recorded to let you adjust the recording level before you start recording.
1 Before you start playing, press PEAK SEARCH.
“ PEAK” flashes in the display and the player starts scanning the disc searching for the highest peak level.
After scanning all the tracks, the player repeats the portion with the highest peak level.
2 Adjust the recording level on the deck.
3 Press xon the player to stop Peak Search.
“ PEAK” disappears from the display.
Notes
6 Start recording on the deck and then press Hon the player.7 Reverse the tape to side B and pressHor Xon the player to resume playing the remaining tracks.To cancel Time Edit

Press CONTINUE.

Tips

•You can program the tracks you want in advance. Create a program selecting the desired tracks, then follow Steps 2 to 7. Be careful that the total playing time of the program does not exceed the tape length of one side.

•You can set the tape length freely using lAMS L.

Example: When the tape length of one side is 30 minutes and 15 seconds

1To set the minutes, turn lAMS Luntil “ 30” appears in the display, then push lAMS L.

2To set the seconds, turn lAMS Luntil “ 15” appears in the display, then push lAMS L.

•To check and change your program, see pages 13 and 14.

•The portion with the highest level may differ every time you try the adjustment on the same disc. The difference is, however, so slight that you won’t find any problem in adjusting the recording level precisely.

•Peak Search does not operate while you open the disc tray by pressing the EX-CHANGE button.

CDs Playing

From Recording CDs

15US