Hoover HVK 400 manual Installation - Electrical Connection

INSTALLATION - ELECTRICAL CONNECTION

"The installation must conform to the standard directives."

HOOVER declines all responsibility for any damage that may be caused by unsuitable or unreasonable use.

•Any queries regarding the power supply cord should be referred to After Sales Service or a qualified technician.

Warning :

•Always check before any electrical operation, the supply tension shown on the electricity meter, the adjustment of the circuit-breaker, the continuity of the connection to earth to the installation and that the fuse is suitable.

•The electrical connection to the installation should be made via a socket with a plug with earth, or via an omnipole cut-out switch with an opening gap of at least 3 mm.

If the appliance has a socket outlet, it must be installed so that the socket outlet is accessible.

•Hoover cannot be held responsible for any accidents resulting from the use of an appliance which is not connected to earth, or with a faulty earth connection continuity.

A power cord is not supplied with the appliance, but the hob is equipped with a terminal block which enables you to choose the correct connection for the particular power supply.

- 5