Playing Alternately (No-Delay Play/X- Fade Play) (continued)
Note
“NO DELAY” does not appear when you operate from the remote.
To change the current player each time a whole track is finished, select “
To change the current player at the specified interval, press
3 Press Hto start playing.
The MEGA CONTROL button lights up while the track in the second player is selected.
To check the X-Fade mode status
Press
The
To cancel No-Delay/X-Fade Play
Press
“
Tips
•you can change the method
•When you press FADER during
Even after you have set the
Notes
•The play starts from the second player if you start play while the MEGA CONTROL button is lit.
•When either player has played all its discs/tracks, both players stop, even if the other player has not finished yet.
•Do not use the controls on the second player during
Additional Information
Using the CONTROL A1II
control system
This player is compatible with the CONTROL A1II Control System.
The CONTROL A1II control system was designed to simplify the operation of audio systems composed of separate Sony components. CONTROL A1II connections provide a path for the transmission of control signals that enable automatic operation and control features usually associated with integrated systems.
Currently, CONTROL A1II connections between a Sony MD deck, CD player, amplifier (receiver), and cassette deck provide automatic function selection and synchronized recording.
In the future the CONTROL A1II connection will work as a multifunction bus allowing you to control various functions for each component.
Note
The CONTROL A1II control system is designed to maintain upward compatibility as the control system is upgraded to handle new functions. In this case, however, older components will not be compatible with the new functions.