What cords will I need?
Connecting Another CD Player
If you have a Sony CD player in which 5, 50, 200, 300, or 400 discs can be inserted and which is equipped with the CONTROL A1II (or CONTROL A1) jack and the command mode of that player can be set to CD3, you can control that player as the second player with this player. After connecting this player and an amplifier, follow the procedure below.
Be sure to turn off the power of each player before making this connection.
To ANALOG OUT
To 2ND CD IN
To an AC outlet
To audio output |
To
CONTROL A1II
To an AC outlet
To audio input | Amplifier |
: Signal flow | To an AC outlet |
•Audio cord (1) (Use the cord supplied with the player to be connected.)
•Monaural (2P)
1Connect the players with an audio cord.
|
| 2ND CD ANALOG | |
L | L | IN | OUT |
|
| ||
R | R | L | L |
|
| ||
IN | OUT | R | R |
2ND CD | ANALOG |
|
|
2Connect the players with a monaural (2P) mini- plug cord.
| CONTROL A1II |
CONTROL A1 |
|
For details on this connection, see “Using the CONTROL A1II Control System” on page 32.
3Set the command mode of this player to CD1 (factory setting) or CD2, and set that of the second player to CD3.
Check the display for the current command mode of this player, if the mode is CD3, change the mode as described on page 29.
2nd NEXT DISC ART. HIT TRACK | GROUP ART. MIN STEP | SEC |
* D I S C - 1 * * * * * *
ALL 1 DISCS SHUFFLE REPEAT 1 GROUP
PROGRAM 1 2 3
MULTI CD TEXT NO DELAY CD1 CD2 CD3
Current command mode
For details on how to operate the second player, see “Controlling Another CD Player” on page 29 and “Playing Alternately” on page 30.
4Connect the AC power cord of both players to an AC outlet.
Note
This method cannot be used with the