Sony CDP-M400CS 35US, Specifications

Specifications

Compact disc player

Laser

Laser output

Frequency response Signal-to-noise ratio Dynamic range

Semiconductor laser (λ = 780 nm) Emission duration: continuous

Max 44.6 ∝W*

*This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up block with 7 mm aperture.

20 Hz to 20 kHz ±0.5 dB More than 108 dB More than 85 dB

Harmonic distortion		Less than 0.012%
Output

	Jack	Maximum	Load
	type	output	impedance
		level

LINE OUT	Phono	2 V	Over 10 kilohms
	jacks	(at 50 kilohms)

DIGITAL OUT	Optical	–18 dBm	Wave length: 660 nm
(OPTICAL)	output
	connector

General
Power requirements		120 V AC, 60 Hz
Power consumption		16 W
Dimensions (approx.)		430 ⋅ 189 ⋅ 537 mm
(w/h/d)		(17 ⋅ 7 1/2 ⋅ 21 1/4 in.) incl. projecting
		parts
Mass (approx.)		8.8 kg (19 lbs 7 oz.)

Supplied accessories

See page 6.

Design and specifications are subject to change without notice.

35US

Contents

Operating Instructions To prevent fire or shock hazard, do not expose the unit to rain or moisture Notes on discs The playback order of the MP3 files Getting Started Playing CDs Storing Information About CDs (Custom Files) Using the Player with Another Component Additional Information Inserting batteries into the remote Notes on digital hookup Note on placement of the player Changing the command mode of the player Inserting CDs CAUTION Removing CDs 10US Display information of the normal discs 11US Display information of CD TEXT discs Display information of MP3 discs 12US Locating a disc on the player 13US Locating a disc directly using the remote Z Locating a disc by searching for a specific Disc Name (Name Search) Locating a disc searching in the playback history (History Search) 14US 15US Playing repeatedly (Repeat Play) Playing all tracks on all discs in random order Playing all tracks (MP3 files) on a specified disc (album) in random order 16US Creating a program on the player 17US Checking the programmed order Changing the programmed order Erasing the program stored in memory 18US Creating a program using the remote Z 19US 20US You can store this information: Where are Custom Files stored If you replace discs with Custom Files Erasing all Custom Files of all discs 21US Changing the Disc Name Erasing the Disc Name 22US 23US 24US Storing the Artist Name Changing the Artist Name 25US Erasing the Artist Name Assigning an Artist Name to a disc (Artist File) Removing the Artist Name from the disc 26US Playing discs assigned the same Artist Name (Artist Play) To assign an Artist Name to a TOP ARTIST button 27US 28US 29US Loading the Disc Names of the second CD player Labeling discs of the second CD player 30US 31US Connecting the CONTROL A1II control system Basic functions of the CONTROL A1II control system 32US 33US 34US 35US Names of controls Buttons Control Switches Jacks