Using the Player with Another Component
Loading the Disc Names of the second CD player
If the second CD player has the Disc Name function (see page 27), you can load the Disc Names of the second CD player into this player’s memory and display them on this player.
1Press MENU/NO.
2Turn the JOG dial until “LOAD 2ndNAME?” flashes in the display.
2nd NEXT DISC ART. HIT TRACK | GROUP ART. MIN STEP | SEC |
L O A D * 2 n d N A M E ?
ALL 1 DISCS SHUFFLE | REPEAT 1 GROUP |
PROGRAM 1 2 3 | DELETE |
MULTI CD TEXT NO DELAY CD1 CD2 CD3
3Push the JOG dial.
This player starts loading. (Loading takes about one minute.)
Labeling discs of the second CD player
You can label discs of the second CD player or change the Disc Names loaded from the second CD player.
1Press MEGA CONTROL.
The MEGA CONTROL button lights up.
2Turn the JOG dial to select the disc you want to assign a Disc Name to.
If the disc slot you select does not contain a disc, “NO DISC” appears in the display and you cannot assign a Disc Name.
3Press MENU/NO.
“NAME IN” appears.
4Push the JOG dial.
5Input the new Disc Name following the procedure in “Labeling discs (Disc Name)” on page 27.
Note
The new Disc Names are stored on this player’s memory, so you cannot display them on the second CD player.
Playing Alternately (No-Delay Play/X-Fade Play)
When you connect a second player, you can play tracks in this player and those from the second player alternately from any play mode (see “Connecting another CD player” on page 6).
Select one of the following methods:
•
•
NO DELAY | ||
|
|
|
I / 1
H
1Select the desired disc and play mode for each player.
2When you select
Press NO DELAY.
“NO DELAY” appears in the display.
When you select
Press
Each time you press the
after 90 sec | T | after 60 sec | T |
To change the current player each time a whole track is finished, select “at track end.”
To change the current player at the specified interval, press
42