Sony CDU948S manual C a u t i o n, Frame ground

2Locate an available power supply cable inside your computer and connect it to the power supply connector on the rear of the CD-R drive as shown.

+	+
-	-

C a u t i o n :

Improper connection may damage the drive and void the warranty.

■Frame ground

When normally installed, the drive unit is not in contact with the host computer directly and should be grounded. Connect the frame ground tab to one of the host computer’s ground cables.

The frame ground cable recommended has a AMP 1-480435-0 housing and 170203-2 or 60711-1 contacts.

Installing the Drive Unit into the Computer 15