Setting the clock automatically
The CT (Clock Time) data from the RDS transmission sets the clock automatically.
1 Press (SHIFT), then press (2) (SET UP) repeatedly until “CT” appears.
Other Functions
You can connect an optional rotary commander
ET
CTOFF
Using the rotary commander
SETUP
2 Press (4) (n) repeatedly until “CT-ON” appears.
The clock is set.
ET
CTCTON
SETUP
3 Press (SHIFT) to return to the normal display.
EN
To cancel the CT function
Select “CT-OFF” in step 2 above.
Notes
•The CT function may not work even though an RDS station is being received.
•There might be a difference between the time set by the CT function and the actual time.
The rotary commander works by pressing buttons and/or rotating controls.
By pressing buttons (the SOURCE and MODE buttons)
(SOURCE)
(MODE)
Each time you press (SOURCE), the source changes as follows:
TUNER ˜CD
Pressing (MODE) changes the operation in the following ways;
Tuner: FM1 nFM2 nMW nLW
Tip
When the POWER SELECT switch is set to position B, you can turn on this unit by pressing (SOURCE) on the rotary commander.
14