Sony CDX-C910 Changing the sound and display settings, Turning off the display, Set up, DSPL on

Models: CDX-C910

1 62
Download 62 pages 23.08 Kb
Page 12
Image 12
Changing the sound and display settings

Changing the sound and display settings

 

You can set:

 

• Amber/Green to change the illumination

 

colour to amber or green.

 

• Beep to turn on or off the beeps.

 

• Dimmer to change the brightness of the

 

display.

 

— Select “Auto” to dim the display only

 

when you turn the lights on.

 

— Select “on” to dim the display.

 

• Loud (Loudness) to enjoy bass and treble

 

even at low volume. Bass and treble will be

 

reinforced.

 

• RM (Rotary Remote) to change the operative

 

direction of the controls of the rotary remote.

 

— Select “norm” to use the rotary remote as

 

the factory preset position.

 

— Select “rev” when you mount the rotary

 

remote on the right of the steering

 

column.

EN

• Angle to change the angle of the front panel.

 

— Select “1” to make the front panel angle at

 

about 80 degrees.

 

— Select “2” to make the front panel angle at

 

about 70 degrees.

 

• Contrast to adjust the contrast if the

 

indications in the display are not

 

recognizable because of the unit’s installed

 

position.

 

1 Press (SHIFT), then press (2) (SET UP)

 

momentarily.

 

2 Press (2) (SET UP) repeatedly until the

 

desired setting mode appears.

 

Each time you press (2) (SET UP), the item

 

changes as follows:

 

Clock nAmber/Green nBeep nDimmer n

 

Loud* nRM nAngle nContrast

 

* When you turn in the station or listen to the CD/

 

MD, “Loud” appears.

 

3 Press (4) (n) to select the desired

 

setting (for example: on or off).

 

At “Contrast” setting, pressing (4) (n)

 

makes the contrast higher, and pressing (1)

 

(N) makes the contrast lower.

 

4 Press (SHIFT).

 

When the mode setting is complete, the

 

normal playback mode appears.

12

Turning off the display

You can turn off the display. Even when you turn off the display, the buttons keep on illuminating. While the display is turned off, pressing any of the buttons turns the display on for five seconds.

1 Press (SHIFT), then press (2) (SET UP) for two seconds.

 

Set up

EQ SUR

DSPL on

2 Press (4) (n) to select “off.” The display turns off.

3 Press (2) (SET UP) for two seconds.

4 Press (SHIFT).

To turn on the display, select “on” in step 2 above.

Actual total number:

Sony CDX-C910 (E,S,C) 3-856-715-11(2)

 

 

Page 12
Image 12
Sony CDX-C910 manual Changing the sound and display settings, Turning off the display, Set up, DSPL on, Actual total number