Changing the sound and display settings

— Menu

The following items can be set:

SET (Set Up)

CLOCK (page 9)

BEEP — to turn the beeps on or off.

RM (Rotary Commander) — to change the operative direction of the controls of the rotary commander.

Select “NORM” to use the rotary commander at the factory-set position.

Select “REV” when you mount the rotary commander on the right side of the steering column.

DSPL (Display)

D.INFO (Dual Information) — to display the clock and the play mode at the same time (ON).

M.DSPL (Motion Display) — the demonstration mode which appears when no source is selected (e.g., tuner is turned off).

A.SCRL (Auto Scroll)

Select “ON” to scroll all automatically displayed names exceeding 8 characters.

When A.SCRL is set to off and the disc/track name is changed, the disc/track name does not scroll.

P/M (Play Mode)

LOCAL (Local Seek mode) (page 13)

Select “ON” to only tune into stations with stronger signals.

MONO (Monaural mode) (page 13)

Select “ON” to hear FM stereo broadcast in monaural. Select “OFF” to return to normal mode.

IF AUTO/WIDE (page 13)

SND (Sound)

EQ7 TUNE (page 19) — to adjust the equalizer curve.

HPF (High pass filter) (page 20)

LPF (Low pass filter) (page 21)

LOUD (Loudness) — to enjoy bass and treble even at low volumes. The bass and treble will be reinforced.

(With the card remote commander)

1 Press (MENU).

To set A.SCRL, press (MENU) during CD/ MD playback.

2 Press (DISC) (+) or (DISC) (–) repeatedly until the desired item appears.

3 Press (SEEK) (+) to select the desired setting (Example: “ON” or “OFF”).

4 Press (ENTER).

After the mode setting is completed, the display returns to normal play mode.

Note

The displayed item will differ depending on the source.

Tip

You can easily switch among categories (“SET,” “DSPL,” “P/M,” “SND,” and “EDIT”) by pressing (DISC) (+) or (DISC) (–) for 2 seconds.

18