Press (SOURCE) to select a source.
Setting the Dynamic Soundstage Organizer (DSO)

If your speakers are installed into the lower part of the doors, the sound will come from below and may not be clear.

The DSO (Dynamic Soundstage Organizer) function creates a more ambient sound as if there were speakers above the dashboard (virtual speakers).

You can store the DSO setting for each source.

DSO mode and image of virtual speakers

*3

*3

*2

*2

*1

 

*1

*4

*4

*1 DSO-1

*2 DSO-2

*3 DSO-3

*4 DSO-OFF

1

2 Press (DSO) repeatedly until the desired DSO setting appears.

Each time you press (DSO), the DSO setting changes.

To cancel the DSO function, select “DSO- OFF.” After 3 seconds, the display returns to normal play mode.

Notes

•Depending on the type of car interior or type of music, DSO may not have a desirable affect.

•If FM broadcasts are difficult to hear, set DSO to OFF.

20

Adjusting the front and rear volume

1 Press (SOURCE) to select a desired source.

2 Press (SOUND) repeatedly until “FAD” appears.

3 Press the volume +/– button repeatedly to adjust the volume of front/rear speakers.

When adjusting with the card remote commander, press (SOUND), then press (SEEK) (+) or (SEEK) (–).

After 3 seconds, the display returns to normal play mode.

Adjusting the cut-off frequency for the front/rear speakers

To match the characteristics of the installed speaker system, you can select the cut-off frequency of the speakers.

Level

 

Cut-off frequency

 

 

 

 

off

 

 

 

80120

Frequency (Hz)

(With the card remote commander)

1 During playback or radio reception, press (MENU).

2 Press (DISC) (+) or (DISC) (–) repeatedly until “HPF” appears.

3 Press (SEEK) (+) or (SEEK) (–) to select the cut-off frequency.

Each time you press (SEEK) (+) or (SEEK) (–), the frequency changes as follows:

OFF (default setting) y 80 Hz y 120 Hz