Press (MENU).

Setting the equalizer (EQ7)

You can select an equalizer curve for 7 music types (XPLOD, VOCAL, CLUB, JAZZ, NEW AGE, ROCK, CUSTOM, and OFF (equalizer OFF)).

You can store a different equalizer setting for each source.

2Press (DISC) (+) or (DISC) (–) to adjust the desired volume level.

The volume level is adjustable by 1 dB steps from –10 dB to +10 dB.

Selecting the equalizer curve

1 Press (SOURCE) to select a source (radio, CD, or MD).

2 Press (EQ7) repeatedly until the desired equalizer curve.

Each time you press (EQ7), the item changes.

To cancel the equalizing effect, select “OFF.” After 3 seconds, the display returns to normal play mode.

Adjusting the equalizer curve

You can store and adjust the equalizer settings for frequency and volume level.

(With the card remote commander)

1

2 Press (DISC) (+) or (DISC) (–) repeatedly until “EQ7 TUNE” appears, then press (ENTER).

3 Press (SEEK) (+) or (SEEK) (–) to select the desired equalizer curve, then press (ENTER).

Each time you press (SEEK) (+) or (SEEK) (–), the item changes.

4 Select the desired frequency and level.

1Press (SEEK) (+) or (SEEK) (–) to select the desired frequency.

Each time you press (SEEK) (+) or (SEEK) (–), the frequency changes.

62 Hz y 157 Hz y 396 Hz y 1 kHz y 2.5 kHz y 6.3 kHz y 16 kHz

To restore the factory-set equalizer curve, press (ENTER) for 2 seconds.

5 Press (MENU) twice.

When the effect setting is complete, the display returns to normal play mode.

19