Storing only the desired stations

You can manually preset the desired stations on any chosen number button.

(With the card remote commander)

1 Press (SOURCE) repeatedly to select the radio.

2 Press (MODE) repeatedly to select the band.

3 Press (SEEK) (+) or (SEEK) (–) to tune in the station that you want to store.

4 Press the desired number button ((1) to (6)) for 2 seconds until “MEM” appears.

The number button indication appears in the display.

Note

If you try to store another station on the same number button, the previously stored station will be erased.

Storing station names

— Station Memo

You can assign a name to each radio station and store it in memory. The name of the station currently tuned in appears in the display. You can assign a name using up to 8 characters for a station.

Storing the station names

(With the card remote commander)

1 Tune in a station whose name you want to store.

2 Press (MENU), then press (DISC) (+) or (DISC) (–) repeatedly until “NAMEEDIT” appears.

3 Press (ENTER).

4 Enter the characters.

1Press (DISC) (+)*1 repeatedly to select the desired character.

A t B t C ... t 0 t 1 t 2 ... t + t – t * ... t *2 t A

*1 For reverse order, press (DISC) (–).

*2 (blank space)

2Press (SEEK) (+) after locating the desired character.

If you press (SEEK) (–), you can move back to the left.

3Repeat steps 1 and 2 to enter the entire name.

5 Press (ENTER).

14