3 Press < or , to select the cut-off frequency.

Each time you press < or ,, the frequency changes as follows:

off (default setting) y 125Hz y 78Hz

4 Press (MENU).

After the frequency setting is complete, the display returns to normal playback mode.

Selecting the spectrum analyzer (SA)

The sound signal level is displayed on a spectrum analyzer. You can select a display for 10 patterns (SA·········1-9), off (spectrum analyzer off), or the automatic display mode where all the patterns appear.

1 Press (SOURCE) to select a desired source.

2 Press (MENU).3 Press M or m repeatedly until “SA” appears.4 Press < or , to select the desired setting.5 Press (MENU).

After the setting is complete, the display returns to normal playback mode.

Connecting auxiliary audio equipment

The unit’s AUX IN (external audio input) terminal on this unit is also used as the BUS AUDIO IN (audio input) terminal.

You can listen to the sound from your car speakers by connecting an optional Sony portable devices.

Note

If you connect an optional Sony CD/MD unit, you cannot connect any portable devices and cannot select “AUX.”

Selecting auxiliary equipmentPress (SOURCE) repeatedly to select “AUX.”Adjusting the volume level

You can adjust the volume for each connected audio equipment.

1 Press (MENU), then press M or m repeatedly until “AUX Level” appears.2 Press (ENTER).3 Press M or m repeatedly to select the desired volume level.

The volume level is adjustable in 1 dB steps from –6 dB to +6 dB.

4 Press (MENU) twice.

After the setting is complete, the display returns to normal playback mode.

To deactivate auxiliary equipment in the music source display1 Press (OFF).

CD/MD playback or radio reception stops (the key illumination and display remain on).

2 Press (MENU).

3 Press M or m repeatedly until “AUX-A·····on” appears.4 Press , to select “AUX-A····off.”

5 Press (MENU).

To restore the indication, select “AUX-A····· on.”

21