Adjusting the equalizer curve

1 Press (MENU).

2 Press M or m repeatedly until “EQ7 Tune” appears, then press (ENTER).

3 Press < or , to select the desired equalizer curve, then press (ENTER). Each time you press < or ,, the item changes.

4 Select the desired frequency and level.1Press < or , to select the desired frequency.

Each time you press < or ,, the frequency changes.

62Hz y 157Hz y 396Hz y 1.0kHzy2.5kHz y 6.3kHz y 16kHz2Press M or m to adjust the desired volume level.

The volume level is adjustable in 1 dB steps from –10 dB to +10 dB.

To restore the factory-set equalizer curve, press (ENTER) for 2 seconds.

5 Press (MENU) twice.

After the effect setting is complete, the display returns to normal playback mode.

Setting the Dynamic Soundstage Organizer (DSO)

If your speakers are installed into the lower part of the doors, the sound will come from below and may not be clear.

The DSO (Dynamic Soundstage Organizer) function creates a more ambient sound as if there were speakers above the dashboard (virtual speakers).

You can store the DSO setting for each source.

DSO mode and image of virtual speakers

*3 *3

*1

*1

*2

*2

*4

 

 

*4

*1 DSO 1

*2 DSO 2

*3 DSO 3

*4 DSO OFF

1 Press (SOURCE) to select a desired source.

2 Press (DSO) repeatedly until the desired DSO setting appears.

Each time you press (DSO), the DSO setting changes “DSO········1-3”, and “off.”

To cancel the DSO function, select “DSO······off.” After 3 seconds, the display returns to the normal playback mode.

Notes

•Depending on the type of car interior or type of music, DSO may not have a desirable affect.

•If FM broadcasts are difficult to hear, set DSO to off.

19