Automatic tuning is not possible.

The local seek mode is set to “on.”

t Set the local seek mode to “off” (page 17).

The broadcast signal is too weak. t Perform manual tuning.

The “ST” indication flashes.

Tune in the frequency accurately.

The broadcast signal is too weak.

t Set to the monaural reception mode (page 17).

A program broadcast in stereo is heard in monaural.

The unit is in monaural reception mode. t Cancel monaural reception mode (page

17).

Interference occurs during FM reception.

The wide mode is selected.

tSet the IF mode to “IF Auto” (page 14).

Error displays/Messages

Error displays(For this unit and optional CD/MD changers)

The following indications will flash for about 5 seconds, and an alarm sound will be heard.

Blank*1

No tracks have been recorded on an MD.*2

tPlay an MD with recorded tracks on it.

Error*1

An inserted CD is dirty or inserted upside down.*2

t Clean or insert the CD correctly.

An inserted CD/MD cannot play because of some problem.*2

t Insert another CD/MD.

High Temp

The ambient temperature is more than 50°C (122°F).

tWait until the temperature goes down below 50°C (122°F).

NO Disc*1

No disc is inserted in the CD/MD unit.

tInsert discs in the CD/MD unit.

NO Magazine

The disc magazine is not inserted in the CD/ MD unit.

tInsert the magazine in the CD/MD unit.

NO Music

A CD which is not a music file is inserted in the MP3 playable CD unit.

tInsert a music CD in the MP3 playable CD unit.

Not Ready

The lid of the MD unit is open or the MDs are not inserted properly.

tClose the lid or insert the MDs properly.

Push Reset

The CD/MD unit cannot be operated because of some problem.

tPress the RESET button on the unit.

*1 When the CD/MD changer is connected to the unit, the disc number of the CD or MD appears in the display.

*2 The disc number of the disc causing the error appears in the display.

If these solutions do not help improve the situation, consult your nearest Sony dealer.

continue to next page t

27