Radio
Storing and receiving stations
Caution
When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident.
Storing automatically — BTM
1Press (SOURCE) repeatedly until “TUNER” appears.
To change the band, press (MODE) repeatedly. You can select from FM1, FM2, FM3, AM1 or AM2.
2Press and hold (BTM) until “BTM” flashes.
The unit stores stations in order of frequency on the number buttons.
A beep sounds when the setting is stored.
Storing manually
1While receiving the station that you want to store, press and hold a number button ((1) to (6)) until “MEM” appears.
The number button indication appears in the display.
Note
If you try to store another station on the same number button, the previously stored station will be replaced.
Receiving the stored stations
1Select the band, then press a number button ((1) to (6)) or (GP/PRESET)
With the card remote commander
To select preset stations, press M or m.
Tuning automatically
1Select the band, then press (SEEK)
Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received.
Tip
If you know the frequency of the station you want to listen to, press and hold (SEEK)
Receiving a station through a list — list-up
You can list up the frequency or the name. For details on labeling a station, see page 9.
1Select the band, then press (LIST).
The frequency or station name appears.
2Press (LIST) repeatedly until the desired station appears.
After 5 seconds, the unit returns to normal reception mode.
3Press (SEEK)
8