Changing the sound settings
Adjusting the sound characteristics
— BAL/FAD/SUB/AUX
You can adjust the balance, fader, and subwoofer volume.
1Press the select button repeatedly until “BAL,” “FAD” or “SUB” appears.
The item changes as follows:
LOW*1 t MID*1 t HI*1 t
BAL
*1 When EQ3 is activated (page 9).
*2 When the audio output is set to “SUB” (page 10).
“ATT” is displayed at the lowest setting, and can be adjusted up to 20 steps.
*3 When “AUX” source is selected.
2Rotate the volume control dial repeatedly to adjust the selected item.
After 3 seconds, the setting is complete and the display returns to normal play/reception mode.
Note
Adjust within 3 seconds of selecting the item.
With the card remote commander
In step 2, to adjust the selected item, press VOL + or
Adjusting the equalizer curve
— EQ3
You can adjust and store the equalizer settings for different tone ranges.
1Select a source, then press (EQ3) repeatedly to select the EQ3 type.
2Press the select button repeatedly until “LOW,” “MID” or “HI” appears.
3Rotate the volume control dial repeatedly to adjust the selected item.
The volume level is adjustable in 1 dB steps, from
To restore the
After 3 seconds, the setting is complete and the display returns to normal play/reception mode.
With the card remote commander
In step 3, to adjust the selected item, press VOL + or
Labeling a station/disc
When you receive a station, or play a disc in a CD changer with the CUSTOM FILE function, you can label each station/disc with a custom name up to 8 characters (Station Memo/Disc Memo).
If you label a station/disc, the name appears on the list (page 8 or 11).
1While receiving a station or playing a disc that you want to label, press and hold (LIST).
2Rotate the volume control dial repeatedly until the desired character appears.
The character changes as follows:
A y B y C ... y 0 y 1 y 2 ... y + y – y ... y (blank space) y A
To move the digital indication, press the select button.
Repeat this operation until the entire name is entered.
3Press and hold (LIST).
The labeling is complete and the display returns to normal play/reception mode.
To display the name, press (DSPL) during reception or playback.
Tips
•To correct or erase a character, overwrite or enter “ .”
•The Disc Memo always takes priority over any prerecorded title.
•You can label a disc on the unit if a changer with the CUSTOM FILE function is connected.
•
With the card remote commander
In step 2, to select the character, press VOL + or
Repeat steps 2 and 3 to adjust the equalizer | continue to next page t |
curve. |
|
9