When an MP3 file is played, you can select an album using the rotary commander.

(With this unit)

To

Do this
Skip albumsPush in and rotate [once for

– Album selection

each album] the control.

 

To continuously skip

 

albums, push in and rotate

 

(and hold) the control.

 

 

(With optional unit)

To

Do this

Skip discs

Push in and rotate [once for

– Disc selection

each disc] the control.

 

To continuously skip discs,

 

push in and rotate once and

 

rotate again within 2

 

seconds (and hold) the

 

control.

 

 

Skip albums

1To enter Album selection

– Album selection

mode, push in, then rotate

 

and hold the control.

 

Within 2 seconds,

 

proceed to step 2.

 

2Push in, then rotate

 

quickly and repeatedly, to

 

skip albums one by one.

 

 

Changing the operative directionThe operative direction of controls is factory-set as shown below.

To increase

To decrease

If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction.

Adjusting the sound characteristicsYou can adjust the balance, fader, low pass filter and subwoofer volume.1 Press (SEL) repeatedly until “BAL,” “FAD,” “LPF” or “SUB” appears.Each time you press (SEL), the item changes as follows:LOW*1 t MID*1 t HI*1 tBAL (left-right) t FAD (front-rear) t LPF (low pass filter)*2*3 tSUB (subwoofer volume)*2*4

*1 When EQ3 is activated (page 21).

*2 When “SUB” is selected (page 20).

*3 The cut off frequency is adjustable to 78 Hz, 125 Hz, or OFF.

*4 The volume level is adjustable between –10 and +10 steps. (Below –10, “ATT” is displayed.)

2 Press the volume +/– button to adjust the selected item.

Note

Adjust within 3 seconds after selecting the item.

Quickly attenuating the sound

Press (ATT).After “ATT-ON” momentarily appears, “ATT” appears in the display.To restore the previous volume level, press (ATT) again.

Tip

When the interface cable of a car telephone is connected to the ATT lead, the unit decreases the volume automatically when a telephone call comes in (Telephone ATT function).

Press (SEL) for 2 seconds while

19

pushing the VOL control.