•Store the correct frequency in the memory.
•The broadcast signal is too weak.
The stations cannot be received. The sound is hampered by noises.
•Connect a power aerial control lead (blue) or accessory power supply lead (red) to the power supply lead of a car’s aerial booster. (Only when your car has
•Check the connection of the car aerial.
•The auto aerial will not go up.
t Check the connection of the power aerial control lead.
•Check the frequency.
•When the DSO mode is on, the sound is sometimes hampered by noises.
t Set the DSO mode to “OFF” (page 22).
Automatic tuning is not possible.•The local seek mode is set to “ON.” t Set the local seek mode to “OFF”
•The broadcast signal is too weak. t Perform manual tuning.
The “ST” indication flashes.•Tune in the frequency accurately.
•The broadcast signal is too weak.
t Set the monaural reception mode to “ON” (page 16).
A programme broadcast in stereo is heard in monaural.The unit is in monaural reception mode.
tCancel monaural reception mode (page 16).
Error displays/Messages
Error displays(For this unit and optional CD/MD changers)The following indications will flash for about 5 seconds, and an alarm sound will be heard.
BLANK*1No tracks have been recorded on an MD.*2
tPlay an MD with recorded tracks on it.
ERROR*1•A CD is dirty or inserted upside down.*2 t Clean or insert the CD correctly.
•A CD/MD cannot play because of some problem.
t Insert another CD/MD.
FAILUREThe connection of speakers/amplifier is incorrect.
tSee the installation guide manual of this model to check the connection.
HI TEMPThe ambient temperature is more than 50°C.
tWait until the temperature goes down below 50°C.
NO DISCNo disc is inserted in the CD/MD unit.
tInsert discs in the CD/MD unit.
NO MAGThe disc magazine is not inserted in the CD unit.
tInsert the magazine in the CD unit. continue to next page t
27