Press (MENU).

Changing the sound and display settings

— Menu

The following items can be set:

SET (Set Up)

•CLOCK-ADJ (page 10)

•BEEP — to turn the beeps on or off.

•RM (Rotary Commander) — to change the operative direction of the controls of the rotary commander.

–Select “NORM” to use the rotary commander at the factory-set position.

–Select “REV” when you mount the rotary commander on the right side of the steering column.

•AUX-A (page 24) — to turn the AUX source display on or off.

DSPL (Display)

•DEMO — to turn the demonstration display on or off. (When the unit is turned off.)

–Select “ON” to activate the demonstration display (The demonstration starts about 10 seconds after the unit is turned off).

–Select “OFF” to deactivate the demonstration display.

•CLOCK (Clock Information) — to display the clock and the play mode at the same time (ON).

•DIM (Dimmer) — to change the brightness of the display.

–Select “AT” to dim the display only when you turn the lights on.

–Select “ON” to dim the display.

–Select “OFF” to deactivate the Dimmer.

•M.DSPL (Motion Display) — to select the Motion Display mode from “1,” “2,” and “OFF.” (When the unit is turned on.)

–Select “1” to show decoration patterns and spectrum analyzer in the display.

–Select “2” to show decoration patterns in the display.

–Select “OFF” to deactivate the Motion Display.

•A.SCRL (Auto Scroll) (page 12)

–Select “ON” to scroll automatically displayed names exceeding 8 characters.

–When the Auto Scroll function is set to “OFF” and the disc/album/track is changed, the disc/album/track name or ID3 tag does not scroll.

P/M (Play Mode)

•LOCAL (Local Seek mode) (page 15)

–Select “ON” to only tune into stations with stronger signals.

•MONO (Monaural mode) (page 15)

–Select “ON” to hear FM stereo broadcast in monaural.

–Select “OFF” to return to normal mode.

•IF AUTO/WIDE (page 15)

SND (Sound)

•EQ7 TUNE (page 22) — to adjust the equalizer curve.

•HPF (High pass filter) — to select the cut-off frequency to “78Hz,” “125Hz” or “OFF.”

•LPF (Low pass filter) — to select the cut-off frequency to “78Hz,” “125Hz” or “OFF.”

•LOUD (Loudness) — to enjoy bass and treble even at low volumes. The bass and treble will be reinforced.

•AUX LVL (page 24) — to adjust the volume level of connected auxiliary equipment.

(With the card remote commander)

1

2 Press (DISC/PRESET) (+) or (DISC/PRESET) (–) repeatedly until the desired item appears.

3 Press (SEEK) (+) or (SEEK) (–) to select the desired setting (Example: “ON” or “OFF”).

4 Press (ENTER).

After the mode setting is complete, the display returns to normal play mode.

Note

The displayed item will differ depending on the source.

Tip

You can easily switch among categories (“SET,” “DSPL,” “P/M,” “SND,” and “EDIT”) by pressing (DISC/PRESET) (+) or (DISC/PRESET) (–) for 2 seconds.

21